Fluxtrol | Induction Heating Aluminum Brazing of Heat Exchanger

Induction Heating Aluminum Brazing of Heat Exchanger

  • Application:IH Aluminum Brazing of Heat Exchanger
  • Original Concentrator:Ferrotron 559H
  • Problem / Failure Mode: Cold Joints, Leaking Joints, Localized Overheating
  • Power Supply:60 kW (30 kW in use), 10–25 kHz, (12–15 kHz in use)
  • Problem / Solution:
    • Customer experiencing long cycle times & poor quality
    • Fluxtrol A chosen as concentrator
    • Condition simulated using computer simulation
    • Optimized coil design via computer simulation
    • New coil design utilizing Fluxtrol A built and tested
    • Tests meet spec and new coil put into production
  • Fluxtrol Advantage:No Quality Issues & 30% Cycle Time Reduction!