Fluxtrol | Induction Heating Fastener Heat Treating/Channel Coil

Induction Heating Fastener Heat Treating/Channel Coil

  • Application:IH Fastener Heat Treating / Channel Coil
  • Original Concentrator:None
  • Problem / Failure Mode: Insufficient Production Rate
  • Power Supply:25 kW (15 kW in use), 150 – 400 kHz (200 kHz in use)
  • Problem / Solution:
    • Customer not satisfied with cycle times
    • Power supply at current limit
    • Customer need to increase production w/limited expense
    • Application evaluated and Fluxtrol 50 selected
    • No other changes were made other than adding Fluxtrol 50
    • Tests meet spec and coil returned to production
  • Fluxtrol Advantage:Production Rate Increased 100%!