Fluxtrol | Magnetic Materials

Fluxtrol Magnetic Materials

Fluxtrol Product Types
Fluxtrol, Inc. is the world leader in in magnetic flux control in induction heating systems and other applications. Fluxtrol does research, develops and manufactures magnetic flux controllers using proprietary soft magnetic composites (aka MagnetoDielectric Materials) produced in both machinable and moldable (formable) varieties. The properties and characteristics of these materials allow using them effectively in a wide range of applications with frequencies from 50 Hz up to 13.56 MHz.
Fluxtrol, Inc. welcomes collaboration with customers or research groups for the advancement of new ideas and special applications.
Contact Us for more information.

Fluxtrol 100

Frequency (Up to 50 kHz)

Excellent mechanical strength, machinability and thermal conductivity.

Fluxtrol A

Frequency (Up to 50 kHz)

For low frequency applications.

Fluxtrol 50

Frequency (10 to 1000 kHz)

Excellent performance over a wide range of frequencies, yet offers the highest permeability in high frequency induction heating applications.

Ferrotron 559H

Frequency (10 to 3000 kHz)

Almost constant magnetic permeability over a range of magnetic flux densities.

Fluxtrol Selection Guide

Fluxtrol Selection Guide

Fluxtrol Product Properties

Fluxtrol Selection Guide

Formable

Machinable

PropertiesUnitsFluxtrol 100Fluxtrol AFluxtrol 50Ferrotron 559HAlphaform LFAlphaform MF
Product Identifier Color fluxtrol 100fluxtrol afluxtrol 50ferrotron 559alphaform lfalphaform mf
Density (±2%)g/cm36.86.66.15.94.14.0
Operating Frequency RangekHzUp to 50Up to 5010-100010-30001-8010-1000
Maximum PermeabilityNone13012055181310
Saturation Flux DensityT1.71.61.51.01.00.9
Temperature Resistance°C225 Long Term
300 Short Term
250 Long Term
300 Short Term
250 Long Term
300 Short Term
250 Long Term
300 Short Term
225 Long Term
300 Short Term
225 Long Term
300 Short Term
Thermal ConductivityW/cm °C0.230.20.060.040.020.02
ResistivitykOhmcm12.50.50.5>15>15>15