2023 - IMAT 23 Soft Magnetic Composite Impeder Geometry Optimization
Author: Sean M. Muyskens, Robert C. Goldstein
Location/Venue: IMAT 2023 Detroit, Michigan
Download Presentation
Location/Venue: IMAT 2023 Detroit, Michigan
Download Presentation
2023 - HES 23 Physical Simulation and Computational Modelling for Validation of Soft Magnetic Composite Impeder Performance
Author: Sean M. Muyskens, David R. Morris, Christopher J. Yakey and Robert C. Goldstein
Location/Venue: HES 2023 Padua, Italy
Download Full Paper
Download Presentation
Location/Venue: HES 2023 Padua, Italy
Download Full Paper
Download Presentation
2022 - IMAT 22 Physical Simulation and Computational Modelling for Validation of Soft Magnetic Composite Impeder Performance
Author: Sean M. Muyskens, Robert C. Goldstein
Location/Venue: IMAT 2022 New Orleans, Louisiana
Download Presentation
Location/Venue: IMAT 2022 New Orleans, Louisiana
Download Presentation
2021 - ASM HTS 21 3D Simulation of an Automotive Wheel Hub and Induction Hardening Coil to Solve Coil Lifetime Issues
Author: Sean M. Muyskens, Tareq I. Eddir, Robert C. Goldstein
Location/Venue: ASM HTS Heat Treat 2021 St. Louis, Missouri
Download Full Paper
Download Presentation
Location/Venue: ASM HTS Heat Treat 2021 St. Louis, Missouri
Download Full Paper
Download Presentation
2021 - ASM HTS 21 Influence of Specimen Design on Maximum Heating Rate and Temperature Variation During Induction Heating in an 805L Dilatometer
Author: Robert Cryderman, Finn Bamrud, Tareq Eddir, Robert C. Goldstein
Location/Venue: ASM HTS Heat Treat 2021 St. Louis, Missouri
Download Full Paper
Download Presentation
Location/Venue: ASM HTS Heat Treat 2021 St. Louis, Missouri
Download Full Paper
Download Presentation
2021 - IMAT 21 Physical Simulation of Soft Magnetic Composite Impeder Performance
Author: Sean M. Muyskens, Robert C. Goldstein
Location/Venue: IMAT 2021 St. Louis, Missouri
Download Presentation
Location/Venue: IMAT 2021 St. Louis, Missouri
Download Presentation
2021 - IMAT 21 Investigating Temperature Profile in Induction Heated Billets and As-Cast Grain Structure Using Computer Simulation
Author: Tareq Eddir (Fluxtrol Inc.), Robert C. Goldstein (Fluxtrol Inc.), Robert Haun (Anspanner LLC)
Location/Venue: IMAT 2021 St. Louis, Missouri
Download Presentation
Location/Venue: IMAT 2021 St. Louis, Missouri
Download Presentation
2021 - UIE 2021 Physical Simulation of Soft Magnetic Composite Impeder Performance for use in Induction Tube Welding Systems
Author: Sean M. Muyskens, Robert C. Goldstein
Location/Venue: UIE 2021 Pilsen, Czech Republic
Download Full Paper
Download Presentation
Location/Venue: UIE 2021 Pilsen, Czech Republic
Download Full Paper
Download Presentation
2021 - UIE 2021 Investigating the Benefit of Soft Magnetic Composite Inserts on Energy Efficiency in Cold Wall Billet Casters Using Computer Simulation
Author: Tareq Eddir (Fluxtrol Inc.), Robert C. Goldstein (Fluxtrol Inc.), Robert Haun (Anspanner LLC)
Location/Venue: UIE 2021 Pilsen, Czech Republic
Download Presentation
Location/Venue: UIE 2021 Pilsen, Czech Republic
Download Presentation
2019 - ASM HTS 19 Short Time Dilatometry Quench System Analyses
Author: Andrew L. Banka, Robert C. Goldstein, Robert L. Cryderman, Tareq Eddir, Andrew Senita
Location/Venue: ASM HTS Heat Treat 2019 Detroit, Michigan
Download Full Paper
Download Presentation
Location/Venue: ASM HTS Heat Treat 2019 Detroit, Michigan
Download Full Paper
Download Presentation
2019 - ASM HTS 19 Improving Corrosion Resistance of Soft Magnetic Composites for Induction Heat Treating Applications
Author: Prem Vaishnava, Mitchel Madeira, Doug Whittaker, Robert C. Goldstein
Location/Venue: ASM HTS Heat Treat 2019 Detroit, Michigan
Download Full Paper
Download Presentation
Location/Venue: ASM HTS Heat Treat 2019 Detroit, Michigan
Download Full Paper
Download Presentation
2019 - ASM HTS 19 Improving Inductive Welding System Performance with Soft Magnetic Composites
Author: Sean M. Muyskens, Tareq I. Eddir, Robert C. Goldstein
Location/Venue: ASM HTS Heat Treat 2019 Detroit, Michigan
Download Full Paper
Location/Venue: ASM HTS Heat Treat 2019 Detroit, Michigan
Download Full Paper
2019 - HES 19 Improving Induction Tube Welding System Performance Utilizing Soft Magnetic Composites
Author: Sean M. Muyskens, Tareq I. Eddir, Robert C. Goldstein
Location/Venue: HES 19 Padova, Italy
Download Full Paper
Download Presentation
Location/Venue: HES 19 Padova, Italy
Download Full Paper
Download Presentation
2019 - Magnetic Core Loss Behavior at High Fields in Magnetic Materials
Author: Prem P. Vaishnava, Robert C. Goldstein
Location/Venue: HES 19 Padova, Italy
Download Full Paper
Download Presentation
Location/Venue: HES 19 Padova, Italy
Download Full Paper
Download Presentation
2018 - Thermomechanical Processing of Friction Welded Steel-Aluminum Billets to Improve Joining Zone Properties
Author: Bernd-Arno Behrens, Robert Goldstein, David Guisbert, Deniz Duran
Location/Venue: IFHTSE TPIM 18 Spartanburg, South Carolina
Download Presentation
Location/Venue: IFHTSE TPIM 18 Spartanburg, South Carolina
Download Presentation
2018 - Influence of Heating Rates on Temperature Gradients in Short Time Dilatometry Testing
Author: Tareq Eddir, Robert Goldstein, Ethan Buchner, Emmanuel De Moor, Robert Cryderman
Location/Venue: IFHTSE TPIM 18 Spartanburg, South Carolina
Download Presentation
Location/Venue: IFHTSE TPIM 18 Spartanburg, South Carolina
Download Presentation
2018 - Thermomechanical Processing for Creating Bi-Metal Bearing Bushings
Author: Bernd-Arno Behrens, Robert Goldstein, Anna Chugreeva
Location/Venue: IFHTSE TPIM 18 Spartanburg, South Carolina
Download Presentation
Location/Venue: IFHTSE TPIM 18 Spartanburg, South Carolina
Download Presentation
2017 - Applications of Induction Heating Enabling Advancement in Materials Science
2017 - Modeling of Short Time Dilatometry Testing of High Carbon Steels
Author: Robert Goldstein, Ethan Buchner, Robert Cryderman
Location/Venue: Colorado School of Mines
Download Presentation
Location/Venue: Colorado School of Mines
Download Presentation
2017 - Influence of Vanadium Microalloying on the Microstructure of Induction Hardened 1045 Steel Shafts
Author: Lee M. Rothleutner, Chester J. Van Tyne, Robert Goldstein, John Jackowski, and Greg Fett
Location/Venue: ASM HTS 17 Cleveland, OH
Download Presentation
Location/Venue: ASM HTS 17 Cleveland, OH
Download Presentation
2017 - Role of Thermal Processing in Tailored Forming Technology for Manufacturing Multi-Material Components
Author: Robert Goldstein, Bernd-Arno Behrens, Deniz Duran
Location/Venue: ASM HTS 17 Cleveland, OH
Topic: Tailored Forming
Download Presentation
Location/Venue: ASM HTS 17 Cleveland, OH
Topic: Tailored Forming
Download Presentation
2017 - Building the Materials Database to Unlock the Potential of Induction Heat Treating
Author: Robert Goldstein, Robert Cryderman
Location/Venue: UIE Congress Hannover, Germany
Location/Venue: UIE Congress Hannover, Germany
2017 - Applications of Induction Heat Treating
Author: Robert Goldstein
Location/Venue: ASM HTS 17 Cleveland, OH
Topic: Heat Treating
Location/Venue: ASM HTS 17 Cleveland, OH
Topic: Heat Treating
2016 - Integrated Computational Development of Induction Heat Treatment Process for Automotive Axle Shafts
Author: Robert Goldstein, Dr. Valentin Nemkov, Dr. Lynn Ferguson, Dr. Zhichao Li
Location/Venue: MS&T 2016
Download Presentation
Location/Venue: MS&T 2016
Download Presentation
2016 - Striation Effect in Induction Heating: Myths and Reality
Author: Robert Goldstein, Valentin Nemkov
Location/Venue: HES 2016 Padua, Italy
Download Presentation
Location/Venue: HES 2016 Padua, Italy
Download Presentation
2016 - Hot Hydroforging of Lightweight Bimaterial Gears and Hollow Products
Author: Bulent Chavdar, Robert Goldstein, Lynn Ferguson
Location/Venue: IFHTSE 2016 Savannah, GA
Download Presentation
Location/Venue: IFHTSE 2016 Savannah, GA
Download Presentation
2016 - Modeling of the Heating Sequences of Lightweight Steel/Aluminum Bimaterial Billets for Hot Forging and Hot Hydroforging
Author: Robert Goldstein, Bulent Chavdar, Lynn Ferguson
Location/Venue: IFHTSE 2016 Savannah, GA
Location/Venue: IFHTSE 2016 Savannah, GA
2016 - Effects of Microalloy Additions and Thermomechanical Processing on Austenite Grain Size Control in Induction-Hardenable Medium Carbon Steel Bar Rolling
Author: B. M. Whitley, J. G. Speer, R. L. Cryderman, R. C. Goldstein, K. O. Findley, D. K. Matlock
Location/Venue: Thermec 2016 Graz, Austria
Location/Venue: Thermec 2016 Graz, Austria
2015 - Characterization of Carbon Fiber Reinforced Thermoplastics for Induction Processing
Authors: John Jackowski, Robert Goldstein, Valentin Nemkov
Location/Venue: Aeromat 15
Location/Venue: Aeromat 15
2015 - Effect of Steel Hardenability on Stress Formation in an Induction Hardened Axle Shaft
Authors: Zhichao (Charlie), B. Lynn Ferguson, Valentin Nemkov, Robert Goldstein, John Jackowski, and Greg Fett
Location/Venue: ASM HTS 15 Detroit, MI
Topic: Stress Evolution
Location/Venue: ASM HTS 15 Detroit, MI
Topic: Stress Evolution
2015 - How Accurate is Computer Simulation of Induction Systems?
Authors: V. Nemkov
Location/Venue: EPM 15 Cannes, France
Topic: Computer Simulation
Location/Venue: EPM 15 Cannes, France
Topic: Computer Simulation
2015 - Hot Hydroforging for Lightweighting - IDE
Authors: Bulent Chavdar, Robert Goldstein, Xi Yang, Jacob Butkovich, Lynn Ferguson
Location/Venue: IDE 15 Bremen, Germany
Topic: Bi-metal Hydroforging
Location/Venue: IDE 15 Bremen, Germany
Topic: Bi-metal Hydroforging
2015 - Best Practice for Design and Manufacturing of Heat Treating Inductors - ASM
Authors: C. Yakey, V. Nemkov, R. Goldstein, J. Jackowski
Location/Venue: ASM HTS 15 Detroit, MI
Topic: Coil Design Techniques
Location/Venue: ASM HTS 15 Detroit, MI
Topic: Coil Design Techniques
2014 - Modeling Induction Heat Distribution in Carbon Fiber Reinforced Thermoplastics
Robert C. Goldstein, John K. Jackowski, Valentin S. Nemkov
Location/Venue: IFHTSE 2014
Location/Venue: IFHTSE 2014
2014 - Magnetic Flux Control in Induction Systems
Author: V. Nemkov
2014 - Simulation of Induction Heating of Slabs using ELTA 6.0
Authors: V. Nemkov, V. Bukanin, A. Zenkov, A. Ivanov
Location/Venue: MEP 14 Hannover, Germany
Topic: Simulation of Slabs
Location/Venue: MEP 14 Hannover, Germany
Topic: Simulation of Slabs
2014 - Induction Process and Coil Design for Welding of Carbon Fiber Reinforced Thermoplastics
Authors: John K. Jackowski, Robert C. Goldstein, Valentin S. Nemkov
Location/Venue: SAMPE 14 Seattle, WA
Topic: Carbon Fiber Composites
Location/Venue: SAMPE 14 Seattle, WA
Topic: Carbon Fiber Composites
2013 - Enhancing Induction Coil Reliability
Authors: Kreter, Goldstein, Yakey, Nemkov
Location/Venue: ASM HTS 13 Indianapolis, IN
Topic: Thermal Effects on Inductor
Location/Venue: ASM HTS 13 Indianapolis, IN
Topic: Thermal Effects on Inductor
2013 - Effect of Spray Quenching Rate on Distortion and Residual Stresses during Induction Hardening of a Full-Float Truck Axle
Authors: Zhichao (Charlie) Li and B. Lynn Ferguson, Valentin Nemkov, Robert Goldstein and John Jackowski, Greg Fett
Location/Venue: ASM HTS 13 Indianapolis, IN
Topic: Stress Evolution
Location/Venue: ASM HTS 13 Indianapolis, IN
Topic: Stress Evolution
2013 - Simulation of Induction System for Brazing of Squirrel Cage Rotor
Authors: V. Vologdin(1), Vl. Vologdin, Jr., V. Nemkov, and K. Kreter
Location/Venue: HES 13 Padua, Italy
Topic: Simulation of Rotor Brazing
Location/Venue: HES 13 Padua, Italy
Topic: Simulation of Rotor Brazing
2013 - Magnetic Flux Control in Induction Installations
Authors: V. Nemkov
Location/Venue: HES 13 Padua, Italy
Topic: Magnetic Flux Control
Location/Venue: HES 13 Padua, Italy
Topic: Magnetic Flux Control
2013 - Recent Design and Operational Developments of Cold Wall Induction Melting Crucibles for Reactive Metals Processing
Authors: R. Haun, M. Charles, R. Lampson, P. Meese, V. S. Nemkov, R. Goldstein, K. Kreter
Location/Venue: HES 13 Padua, Italy
Topic: Cold Crucible System Design
Location/Venue: HES 13 Padua, Italy
Topic: Cold Crucible System Design
2013 - Modeling and Optimization of Cold Crucible Furnaces for Melting Metals
Authors: V. Nemkov, R. Goldstein, K. Kreter, and J. Jackowski
Location/Venue: HES 13 Padua, Italy
Topic: Modeling Cold Crucible Melting
Location/Venue: HES 13 Padua, Italy
Topic: Modeling Cold Crucible Melting
2013 - Modeling Stress and Distortion of Full-Float Truck Axle During Induction Hardening Process
Authors: Dr. Lynn Ferguson, Dr. Zhichao Li, Dr. Valentin Nemkov, Robert Goldstein, John Jackowski, Greg Fett
Location/Venue: HES 13 Padua, Italy
Topic: Stress Evolution
Location/Venue: HES 13 Padua, Italy
Topic: Stress Evolution
2012 - Modified Solenoid Coil That Efficiently Produces High Amplitude AC Magnetic Fields with Enhanced Uniformity for Biomedical Applications
Authors: V. Nemkov, R. Ruffini, R. Goldstein, J. Jackowski, T. L. DeWeese, R. Ivkov
Publication: IEEE TRANSACTIONS ON MAGNETICS, VOL. 48, NO. 1
Topic: Cancer Treatment
Publication: IEEE TRANSACTIONS ON MAGNETICS, VOL. 48, NO. 1
Topic: Cancer Treatment
2011 - Stress and Distortion Evolution During Induction Case Hardening of Tube
Authors: Dr. Valentin Nemkov, Mr. Robert Goldstein, Mr. John Jackowski
Location/Venue: 26th ASM HTS Cincinnati, OH
Topic: Stress Evolution
Location/Venue: 26th ASM HTS Cincinnati, OH
Topic: Stress Evolution
2010 - Temperature Prediction and Thermal Management for Composite Magnetic Controllers of Induction Coils
Authors: V. Nemkov, R. Goldstein, J. Jackowski, N. Vyshinskaya, C. Yakey
Location/Venue: HES 10 Padua, Italy
Topic: Concentrator Heating
Location/Venue: HES 10 Padua, Italy
Topic: Concentrator Heating
2010 - Design of Induction Coil For Generating Magnetic Field For Cancer Hyperthermia Research
Authors: V. Nemkov, R. Ruffini, R. Goldstein, J. Jackowski, T.L. DeWeese and R. Ivkov
Location/Venue: HES 10/COMPEL Padua, Italy
Topic: Cancer Treatment
Location/Venue: HES 10/COMPEL Padua, Italy
Topic: Cancer Treatment
2009 - Advanced Induction Heat Treatment Technologies and Design Methods
Location/Venue: China
Topic: Inductor Design Procedure and Methods
Topic: Inductor Design Procedure and Methods
2009 - Composite Materials for Magnetic Field Control in EPM
Authors: V. Nemkov, R. Ruffini, A. Kolesnichenko
Location/Venue: EPM Dresden, Germany
Topic: Concentrators
Location/Venue: EPM Dresden, Germany
Topic: Concentrators
2009 - Integration of Induction Heat Treat Simulation into Manufacturing Cycle
Conference/Publication: CAT research
Topic: Simulation for Hardening and Stress Prediction
Topic: Simulation for Hardening and Stress Prediction
2009 - Virtual Prototyping of Induction Heat Treating
Authors: Robert C. Goldstein, Valentin Nemkov and John Jackowski
Location/Venue: 25th ASM HTS Indianapolis, IN
Topic: Simulation for Heating/Hardening Prediction
Location/Venue: 25th ASM HTS Indianapolis, IN
Topic: Simulation for Heating/Hardening Prediction
2008 - Use of Frequency Control to Optimize Induction Axle Scan Hardening
Authors: Valentin Nemkov, Robert Goldstein
Location/Venue: UIE Katowice, Poland
Topic: Heat Treating
Location/Venue: UIE Katowice, Poland
Topic: Heat Treating
2005 - Application of High Amplitude Alternating Magnetic Fields for Induction of Nanoparticles Localized in Cancer
Authors: Robert Ivkov, Sally J. DeNardo, Wolfgang Daum, Allan R. Foreman, Robert C. Goldstein, Valentin S. Nemkov, and Gerald L. DeNardo
Conference/Publication: Journal of Clinical Cancer Research 11 (19 suppl)
Topic: Cancer Treatment
Conference/Publication: Journal of Clinical Cancer Research 11 (19 suppl)
Topic: Cancer Treatment